3" Steel Angle Grinder Extender
Brand: BHA
- SKU:
- EXT358
- Pack Size:
- 1 Piece
- Compatible Abrasives:
- Center-Plate Buffing Wheels
- Compatible Tools:
- Angle Grinder
- Overall Length:
- 3"
- Additional Features:
- Adds 2" Spindle Length; Holds Two Buffs
- Thread Length:
- 1-1/4"
- Product Type:
- Angle Grinder Arbor Extension
- ship_profile:
- standard
Product Description
3" x 5/8"-11 Angle Grinder Screw on Extension
3” Steel Angle Grinder Arbor Extensions are designed to extend the length of the angle grinder shaft to allow for safe use and addition buffs if desired. The 3” extension nut attaches to all right-angle grinders with 5/8” threaded receiver. The angle grinder extender adds 2” of separation between the buff and the grinder. The threaded portion, where the buffing wheel attaches is 1-1/4″ long allowing for two buffing wheels to be used simultaneously. One should never use a right-angle grinder without having an extender to safely push the buffing wheel out and provide a safe distance for the operator. MADE IN USA.
Pack Size: 1 Piece
Product Features / Benefits:
- 5/8″-11 threaded
- Extends shaft 2″
- Allows running two buffs at once
Use with (Tool):
- Right Angle Grinder
Attachment Instructions:
- Screw the female section down onto the right angle grinding wheel.
- Place buffing wheels with center plates, or an inserted safety flange, onto the male threaded section.
- Secure the buffing wheel(s) with a 5/8″ hex nut or a low-profile inserted flange.
Specs:
- Total Length = 3"
- Screw on Shaft Length = 1-1/4"
- Material = Steel