6" x 1" x 1" Unmounted Aluminum Oxide Flap Wheels by Black Hawk Abrasives are built to last. Manufactured using premium aluminum oxide grains and x-weight cloth flaps which is more stiff, durable and thick than a paper or film backed alternative. Each 6 inch unmounted flapper wheel is designed with their flaps arranged in a circular fan shape around the center arbor hole. This design increases the useful life of the 6 inch flapper wheel and provides flexibility to grind flat or curved work pieces. As the 6" x 1" x 1" flap wheel with a hole is used the flaps wear down, exposing new fresh aluminum oxide grains which provides a long duration of consistent cuts. Additionally, the fan shape of these 6 inch flap wheels allows for added flexibility which makes them ideal for grinding irregular shaped or contoured work pieces. Unmounted large flap wheels can conform to most shapes and are especially effective on pipes, tubes and other cylindrical items and are designed to be used on a bench grinder, pedestal grinder, or straight finishing tool with a 1 inch arbor. So if you have a flat or irregular surface made of metal, wood, rubber, fiberglass, or plastic that you need to grind, blend, deburr, clean, polish, or sand the 6 inch by 1 inch by 1 inch flapper wheel is the abrasive you're looking for.
(SOLD INDIVIDUALLY)
Suitable For:
• Ferrous Metals
• Non-Ferrous Metals
• Stainless Steel
• Iron
• Brass
• Aluminum
• Plastic
• Wood
• Rubber
• Fiberglass
Uses Include:
• Deburring
• Deflashing
• Cleaning weld lines and weld splatter
• Removal of Rust
• Blending
• Finishing and Polishing
• Light Grinding
• Stock Removal
Use on:
• Pedestal Grinder
• Bench-Top Grinder
• Straight Finishing Tool with 1 inch Arbor
Specs:
• Dimensions = 6” (Diameter) x 1” (Wide) x 1” (Hole)
• Max RPM = 6,000
• Material = Aluminum Oxide
• Grits = 40, 60, 80, 120 Grit available
The is great. The sanding wheel I ordered isnt working. Seems the flaps do nit have any curve , The wheel doesnt work
I make knives as a hobby. I like using flap wheels for doing hollow grinds on knife blades. Also they're just about the perfect size for shaping the curved sweep on the front of bowie and clip point knife blades. They also work well for recurve and Gladius style blades. Thank you, John Nowak, J&J knives 🗡
Looks good, but the center hole was not the same size as my reducer that is a 1”. Took a while to get it centered on the shaft, once I did, it worked great. I thought 1” was the same everywhere, guess not.
