1-1/2" x 30" Surface Conditioning Sanding Belt


Pack Size:
1 Belt

Free Shipping on orders over $99 Congratulations! Your order qualifies for FREE SHIPPING (Restrictions may apply)

Frequently Bought Together

Please choose options for all selected products

  • Choose Options

Product Description

1-1/2" x 30" Surface Conditioning Sanding Belt

Name: 1-1/2" x 30" Surface Conditioning Belt

1-1/2” x 30” surface conditioning sanding belts are made with flexible non-woven, nylon mesh fibers, impregnated with abrasive grains. These belts are comparable to scotchbrite belts and are made for use on a pipe belt sander requiring a 1.5” x 30” belt. These 1-1/2 inch by 30 inch belts are specifically designed to sand down, clean up or polish while reducing heat. By keeping the work piece cool while grinding these belts prevent discoloration or damage. Each surface conditioning sanding belt also features a coating to prevent loading and extend the useful life of the belt. These 1.5 inch thick by 30 inch long pipe belt sander surface conditioning belts are extremely tough and due to their spongy characteristics are perfect for work on contoured surfaces such as pipes and tubing or on edges. These surface conditioning belts are particularly effective at rust and corrosion removal, finishing metals including stainless steel, as well as creating a straight line brushed finish on a wide number of metals. These 1-1/2” x 30” Surface Conditioning Belts come in coarse (tan), medium (red), fine (blue), ultra fine (gray). Made in USA

Suitable For: All Metals,‎ Wood, Paints and Coatings
Width: 1-1/2″
Length: 30″

Tan (Coarse): 60 - 80 Grit

Red (Medium): 100 - 150 Grit

Blue (Fine): 220 - 320 Grit

Gray (Ultra Fine): 400 Grit

Material: Non-Woven
Use: Flex Pipe Belt Sander, Fein Pipe Belt Sander, and Metabo Pipe and Tube Belt Sander
Quantity: 1 Belt per Order

Looking for a different size, material or grit? We have access to an extensive amount of hard to find sanding belts. Please contact us and let us know what your looking for.

Reviews Write a Review

  • 5
    1-1/2" x 30" Gray conditioning belt.

    Posted by Bill on May 9th 2020

    I purchased these to remove severe oxidation that had formed on the way tubes of my Shopsmith that had been in storage for a few years. These belts made quick work at removing the oxidation and leaving a smooth almost polished surface that just needed some wax to protect the surface.
    These belts held up very well and are still in good condition after removing all of the oxidation. I was very pleased with the results and would highly recommend these to anyone.

  • 5
    1 1/2x30" Blue(fine) surface conditioning belt

    Posted by Robert Dow on Jul 9th 2019

    Used this belt on 316L stainless tube. Belt left a consistent satin finish on the surface equivalent to a 400 grit paper. Wear on the belt is low after doing about 30' of 2" tube. Finer grits and a felt belt for polishing would complete the set.
    Would buy again.

  • 5
    sanding belts

    Posted by Unknown on May 24th 2019

    they worked perfect

  • 5
    Great for pipe

    Posted by Conrad on Mar 20th 2018

    This product works great for polishing sanitary piping and takes some of the hassle out of a multistep process to clean welds. Although I do wish I could try out the blue belts as they are a little bit finer than the red one in which I purchased. All in all 5 out of 5 for the quality