5" x 1/4" x 7/8" Grinding Wheel Type 27 (Depressed Center)
SOLD IN PACKS OF 1 (Individually)
5” x 1/4" x 7/8” Grinding Wheels by Black Hawk Abrasives are 5 inch diameter aluminum oxide bonded abrasive wheels designed for medium to heavy stock removal grinding. Each 5 inch grinding disc starts with the internal reinforcement of high tensile strength fiberglass mesh. The grinder wheels come together with premium A24T aluminum oxide grains, providing increased hardness. The increased harness makes the disk cut quicker and decreases the wheel loss during more intense grinding jobs. Meant to be attached to an angle grinder, this 5 inch grinding disc is the perfect abrasive wheel for general grinding, rust removal, removing weld splatter or even rust removal. Use this 5” x 1/4" x 7/8” grinding disc on steel, structural steel, all ferrous metals, iron pipe, metal tubing or bar stock.
These wheels out performed the ones we had been using
Very nice I've been cutting alluminum channel 3/4" thick building a set of Lowboy Ramps useing the.045 x 6"× 7/8 " cutter disks cuts fast and clean.thankyou again (<÷)
They're fine blades, and do what I need, grind...
Very good,I would highly recommend this product 👍�
As a company, we are switching over using this product exclusively.
Good balance between material removal speed and disc life…these are good wheels at a good price
