3" Quick Change Roloc (Type R) Zirconia Flap Discs Grinding Wheels for Die Grinder are available in 36 Grit, 40 Grit, 60 Grit, 80 Grit, and 120 Grit. Featuring a twist on / twist off attachment and small 3" diameter these small flapper discs are extremely versatile.
(SOLD INDIVIDUALLY)
Black Hawk 3” Quick Change Flap Discs are the perfect tool for cleaning weld lines and weld splatter, deburring, deflashing, removing rust, blending, or general stock removal in narrow, small areas. By shrinking down and adhering the premium flap discs to a roloc backing (Equivalent to 3M Roloc fastening system) Black Hawk has made an extremely versatile, metal grinding abrasive for use on a die grinder. These quick change flap discs are a longer lasting and tougher quick change option than standard quick change discs. In some instances these 3” quick change flap discs last 10 to 20 times as long as the standard quick change alternative. Additionally, these small flapper discs reduce the loading commonly seem with quick change discs which provides a much more consistent grind. So if you have a tough metal grinding job, in a small space, quick change flap discs by Black Hawk are the solution you’ve been searching for!
Product Features:
• Premium Zirconia Abrasive Grains
• High Strength Poly / Cotton Sanding Strips
• Plastic roll-on backing (Type R)
• 10 to 20 times longer life than standard quick change discs
• Loading Resistant compared to standard quick change discs
• Perfect for tight work space
• Contaminant Free: Less than 0.1% Iron, Sulfur and Chlorine - will NOT cause after-rust
Uses Include:
• Deburring
• Deflashing
• Cleaning weld lines and weld splatter
• Removal of Rust
• Blending
• Finishing and Polishing
• General Sanding / Grinding
• Stock Removal
Use on:
• Die Grinder (Needs Standard 3" Female Roll-On Disc Pad Holder)
Specs:
• Type R – Male Roll On (Equivalent to 3M Roloc fastening system)
• Dimensions = 3” Diameter
• Max RPM = 20,000
• Material = Zirconia
• Grits = 36, 40, 60, 80 & 120 Grit available
I was running low on 2 & 3" airtool/die grinder right angle discs and saw these while ordering. The 'chinese tool takeout' hasn't been carrying them lately. I went over to get some and they were out and I shopped around online. I use a lot of flaps on the 4+" right angle for polishing/finishing after grinding down. I've been using the small 120 discs, but the flaps do a better job and seem to last better. So I ordered 3" flaps with the discs to meet the free shipping minimum. I'm grinding MIG welds mostly on sheet metal and 1/4 stock fabs CS and SS. Flaps don't seem to make as much heat and last better, but maybe just me.
Great product at a great price These work great in my little air grinder
Worked good getting parts ready for paint. It was easy to smooth the surface and remove sharp burs
So far so good. They’re wearing well without issue.
They last FOREVER & you can use them till they are completely gone
These work awesome bought one to try and ordered more they cut good and last longer than just the pad style!
The work very nice get into hard to get spots
I have been using it on metal art that i do,have uded it to smooth up welds and polish hardened metals,old gears,hammer heads,horseshoes, They seem to be holding up well and love the fact they are an easy change on my die grinders, would definitely recommend folks to try them,i will purchase more
These little guys work excellent, get into tight places, and hold up well!
