Precision Small-Diameter Cutting for Tight Spaces & Minimal Material Loss
The BHA 2" x 1/32" x 3/8" Cut-Off Wheel is engineered for high-precision cutting where access is limited and accuracy is non-negotiable. At just 1/32" thick, this ultra-thin profile creates a narrow kerf that removes 50% less material than standard 1/16" wheels. This translates to faster plunge rates, lower heat generation, and cleaner edges on sheet metal, stainless steel, and fasteners.
See full specifications below.
| Material | Notes |
|---|---|
| Carbon steel | Bolt studs, rod, bar stock, pipe, sheet. Primary use case for this disc. |
| Mild steel | Body panels, brackets, exhaust components, conduit. |
| Stainless steel | Efficient for cutting stainless hardware and tubing; ultra-thin kerf limits heat discoloration |
| Cast iron | Cuts cast iron at this diameter; expect faster disc wear compared to steel. |
| Aluminum | Suitable for cutting aluminum arrow shafts, brackets, and trim; provides clean cuts on non-ferrous soft metals. |
| Product Type | Cut-Off Wheel / Cutting Disc |
| Brand | BHA (Black Hawk Abrasives) |
| Abrasive Grain | Aluminum Oxide |
| Type | Type 1 (Flat) |
| Diameter | 2" |
| Thickness | 1/32" (approx. 1mm) |
| Arbor Size | 3/8" |
| Grit | 60 |
| Bond | Reinforced Resinoid (BF) |
| Hardness | T (Hard) |
| Max RPM | 30,000 |
| Pack Size | 10 |
| Compatible Tools | Air cut-off tools, electric die grinders (DeWalt®, Milwaukee®, Makita®, Metabo®, Bosch®), pneumatic die grinders (requires 3/8" x 1/4" mandrel), mini cut-off craft saws, mini chop saws, 2" benchtop cut-off miter saws |
| Certifications | MPA Tested; complies with ANSI B7.1 and EN 12413; ISO 9001 certified |
Industrial & Bulk Procurement
Empire supplies auto body shops, collision centers, and MRO operations that run die grinders daily and go through small-diameter discs at volume. If you're stocking multiple sizes or need case-quantity pricing, contact our team for a quote.
Request Bulk PricingAlso Available in 2"
| Disc | Best For |
|---|---|
| 2" x 1/32" x 3/8" — 10 Pack (this page) Ultra-thin kerf, 3/8" arbor |
Precision cuts, minimal material loss, fast bite on thin stock |
| 2" x 1/16" x 3/8" — 10 Pack Standard thickness, 3/8" arbor |
Heavier work and repeated cuts where disc life matters more than kerf width |
Need a 3" disc for more cutting depth or a 1/4" arbor?
It depends on the tool. Air cut-off tools with a 3/8" arbor mount these directly. If you're using a pneumatic or electric die grinder with a 1/4" collet, you'll need a 3/8" x 1/4" cut-off wheel mandrel — the disc won't seat without it. Mini chop saws and 2" benchtop cut-off saws with a 3/8" arbor also mount these direct.
Thickness is the only difference. The 1/32" disc has a thinner kerf — it removes less material per cut, starts faster on thin stock, and is the better choice when precision matters. The 1/16" disc is about twice as thick, so it lasts longer per disc on heavier or repeated cuts. If you're trimming bolts and working in tight spots, 1/32" is the more common pick. If you're doing heavier cutting where disc life is the priority, go with 1/16".
Yes. The 2" diameter and 1/32" kerf make these a common choice for cutting carbon and aluminum arrow shafts on a mini benchtop chop saw. The thin kerf keeps the cut clean with minimal shaft material lost. Many customers use these specifically for this application with small cut-off saws.
